(continued ...) thoroughly. Position the seal onto the door. Start at the top and work your way around the complete perimeter. Clockwise is good. Inch-by-inch, reinstall the mounting hardware in reverse order. At first, do not tighten any screws until all screws are in place.
Go over the new seal carefully checking for binding and irregularities. Work your way around one final time tightening the screws or pressing on the track system. If screws are involved, do not over tighten.
Repeat the light and paper inspection tests to verify the installation. You should find that the new seal passes your tests. Congratulations, you have just saved some more energy.EnergyWrite.com